8051 Development Board with USB Programmer | On-Board MAX232 and AT89S52 Microcontroller IC
First of all 8051 development board with USB programmer Project Kit Support AT89S51, AT89S52, P89V51RD2, etc. 40-Pin DIP Chip.USB Programmer can be used for both 8051-AVR IC (2in1)
Description of 8051 Development Board with USB Programmer Kit:
If you are learning microcontroller programming and want to make a project based on 8051 microcontrollers then this 8051 development board with a USB Programmer kit will help you. Furthermore, With this board, you can develop and prototype with any of 8051(AT89S51, AT89S52, P89V51RD2, AT89Cxx) 40 pin microcontrollers. The board has also a status LED. Because of The 1.5 Amp bridge rectifiers, you can allow this board to be powered with both AC and DC power supply adapters. Even more, Board having an RS232 Serial port for flashing the P89V51RD2 (NXP) microcontroller and also use for interfacing GSM module, GPS module, RFID module. There is also a 5V, 12V, GND power bus which allows to power external peripherals module.
Feature of 8051 Development Board:
- DIP 40 Pin Microcontroller IC Socket For Easy Insert and Removal of Microcontroller IC.
- On-board MAX232 Interface Circuit for Easy Communication with a computer & other RS232 serial devices (GPS modules, GSM Modems, etc)
- High-quality FR-4(1.6 mm) PCB
- On-Board bridge rectifier so that board can accept both AC and DC Input voltages Power supply
- Recommended Input Voltage : 9-12V
- Min-Max Input Voltage : 9-18V
- On-Board 5 mm Power Plug-in DC Jack
- On-Board 5V regulator (LM7805) circuit.
- On-Board Power ON-OFF switch.
- On-Board power indication RED LED.
- On-Board GREEN USER LED connected to P2.0 through jumper JP3.
- On-Board Input User Switch P3.3 through jumper JP2.
- On-Board Input External Interrupt Switch (INT1) at P3.3 through jumper JP2.
- On-board Quartz Crystal 11.05892 MHz
- Port Extensions for all PORT with Detailed Pin Labeling for Easy Identification of Pin
- External Pull-Up resistors for Port 0
- On-board ISP connector for loading HEX file into Microcontroller like AT89S51/52 etc.
- Vcc bus (5V and 12V) & GND bus provided to Give POWER Supply to the External Peripheral.
- Four 3mm mounting holes for easy mounting
- On-board Reset button.
- Dimensions: 12cm x 6.4cm
Download 8051 kit document:
- Download Datasheet User Manual – 8051 Development Board
- Download Circuit Diagram – 8051 Microcontroller Board
AVR 8051 USB ISP Programmer Support many Digital Microcontrollers like (89S51, 89S52, AT89SXX, Classic AT90SXX, CAN Series) & (AVR, ATmega, ATtiny), etc.
About AVR 8051 USB ISP Programmer:
First of all USB AVR and AT89Sxx ISP (In-System Programming) Programmer is a low-cost USB-based programmer. There is no need to take out the target microcontroller from the development Board. This programmer will work with a wide variety of Atmel AVR and AT89Sxxxx microcontrollers. This is quite compact, but the design is really elegant. The USB interface is achieved by using an atmega8 processor and the rest is done in firmware.
Features of Atmel AVR 8051 ISP Microcontroller Programmer:
- Allows You to Read or Write the Microcontroller Flash, EEPROM, Fuse Bit, and Lock Bits.
- Support Windows OS (Xp to 10), Mac OS X, and Linux.
- ATmega8 with USBasp Firmware Pre-loaded.
- Support ATmega 8/328, 16, 32, and many others including 8051 with the same Programmer.
- SCK Option to Support Targets With Low Clock Speed (<1.5 MHz).
- 5 KB/sec Maximum Write Speed.
- The programmer can Provide a 5V supply for Target Microcontroller, so No Need of Any External Supply.
- Two Status LEDs | Green LED : Power Supply Indicator | RED LED : This is ON While Programmer is Busy
- 6 pin Polarized ISP Interface for Easy Connection.
Supported Software Download For 8051 & AVR USB Programmer:
- Progisp – Windows GUI application for AVR and AT89Sxx. (2)
- AVRdude – Version 5.2 or later. AVRdude is available for many platforms. (1)
- Khazama AVR Programmer – All Windows OS (Xp to 10) GUI applications for USBasp & avrdude. (1)
- Khazama AVR Programmer and AVRdude do not support AT89SXX.
- Progisp support almost both AVR and AT89SXX controller.
- (All in 1 RAR file) For How to install driver | Circuit Diagram | Connection | Program 8051 AVR Microcontroller | Driver For All Windows OS 64-bit & 32-bit
- Download Datasheet 8051 AVR USB Programmer User Manual
- Download Driver for All Windows OS (xp to 10) Work With all (Win 64-bit or 32-bit OS)
- Download Tutorial How To Program 8051-AVR Microcontroller
- ProgrISP Software (For 8051 & AVR Programming) Download
- AVRDude Software (For Only AVR Programming) Download
- Khazama Software (For Only AVR Programming) Download
Supported Microcontroller List:
ATMEL ATmega Series:
- ATmega8 ATmega8A ATmega48 ATmega48A ATmega48P ATmega48PA
- ATmega88 ATmega88A ATmega88P ATmega88PA ATmega168 ATmega168A
- ATmega168P ATmega168PA ATmega328 ATmega328P ATmega103 ATmega128
- ATmega128P ATmega1280 ATmega1281 ATmega16 ATmega16A ATmega161
- ATmega162 ATmega163 ATmega164 ATmega164A ATmega164P ATmega164PA
- ATmega169 ATmega169A ATmega169P ATmega169PA ATmega2560 ATmega2561
- ATmega32 ATmega32A ATmega324 ATmega324A ATmega324P ATmega324PA
- ATmega329 ATmega329A ATmega329P ATmega329PA ATmega3290 ATmega3290A
- ATmega3290P ATmega64 ATmega64A ATmega640 ATmega644 ATmega644A
- ATmega644P ATmega644PA ATmega649 ATmega649A ATmega649P ATmega6490
- ATmega6490A ATmega6490P ATmega8515 ATmega8535
- ATtiny12 ATtiny13 ATtiny13A ATtiny15 ATtiny25 ATtiny26 ATtiny45 ATtiny85
- ATtiny2313 ATtiny2313A
- AT90S1200 AT90S2313 AT90S2333 AT90S2343 AT90S4414 AT90S4433 AT90S4434 AT90S8515 AT90S8535
- AT90PWM2 AT90PWM3
- AT89S51 AT89S52 AT89S53 AT89S8252 AT89S8253
- 1 x USB ISP Programmer
- 1 x 6-pin Polarized Cable
- 1 x USB A to B Cable
- 1 x 8051 Development Board
- 1 x AT89S52 On-Board Microcontroller IC
- 1 x MAX232 On-Board RS232 driver IC
- POWER SUPPLY Adapter IS NOT Included WITH THIS ITEM(8051 Development Board with USB Programmer Kit).
Have any queries, Please Contact Us